Guest Report Post Posted April 23, 2018 https://pcpartpicker.com/list/jgZxcY. This is the first build I made some changes like going for 1080 instead of a 1080ti so I could get more things that would be better. I'm going to start making videos on this computer and also editing my videos (of course lol). Also doing some gaming. Share this post Link to post Share on other sites More sharing options...
rapperdan 2,323 / 0 Report Post Posted April 23, 2018 Edited April 23, 2018 by rapperdan I just want to make sure you know that, that thread ripper will not be fully used with almost all engines, so you might be better off with an 1800x, as you could run it on a higher frequency. also ez flash is pretty easy. I saw that bios compared to mine and the interface looks so much easier. also be carefull with that thermal paste because iirc it is metal based and if you put it on a cpu that has a metal that is not the same it will cause some wicked erosion due to two different electrical conductivity properties. Edited April 23, 2018 by rapperdan The best server in GFL better then MilkMans TTT server will ever be Share this post Link to post Share on other sites More sharing options... Achievements 3
Guest Report Post Posted April 23, 2018 13 minutes ago, rapperdan said: I just want to make sure you know that, that thread ripper will not be fully used with almost all engines, so you might be better off with an 1800x, as you could run it on a higher frequency. also ez flash is pretty easy. I saw that bios compared to mine and the interface looks so much easier. also be carefull with that thermal paste because iirc it is metal based and if you put it on a cpu that has a metal that is not the same it will cause some wicked erosion due to two different electrical conductivity properties. Oh okay Share this post Link to post Share on other sites More sharing options...
rapperdan 2,323 / 0 Report Post Posted April 24, 2018 Edited April 24, 2018 by rapperdan On 4/23/2018 at 4:44 PM, RainGamma said: Oh okay my bad it was this one https://www.newegg.com/Product/Product.aspx?Item=2MB-001D-00002 not the one you are using like I said I was not sure also ty @Bara so anyways you should be good that brand is just into liquid metal thermal pastes anyways take care. Edited April 24, 2018 by rapperdan The best server in GFL better then MilkMans TTT server will ever be Share this post Link to post Share on other sites More sharing options... Achievements 3
Guest Report Post Posted April 24, 2018 1 hour ago, rapperdan said: my bad it was this one https://www.newegg.com/Product/Product.aspx?Item=2MB-001D-00002 not the one you are using like I said I was not sure also ty @Bara so anyways you should be good that brand is just into liquid metal thermal pastes anyways take care. Okay thanks for your help! Share this post Link to post Share on other sites More sharing options...
Bara 38 / 2,029 Report Post Posted April 25, 2018 Why did you use an NZXT X62 instead of a Enermax (TR4 version) AiO? The NZXT doesn't cover the full cpu. Or why a 1080 instead of 1080ti? I mean you've 32gb ram and 1950x cpu with 16 cores/32 threads. Share this post Link to post Share on other sites More sharing options...
Guest Report Post Posted April 25, 2018 Oh because my budget is 3200 and I wanted to get a good monitor. Share this post Link to post Share on other sites More sharing options...
Guest Report Post Posted April 25, 2018 https://pcpartpicker.com/list/gTTCzY okay what about this? Share this post Link to post Share on other sites More sharing options...
Guest Report Post Posted April 25, 2018 Btw I won't play many games that require a 1080 or something. I might just play Gmod and scp secret lab for the moment Share this post Link to post Share on other sites More sharing options...
Bara 38 / 2,029 Report Post Posted April 25, 2018 19 hours ago, RainGamma said: Oh because my budget is 3200 and I wanted to get a good monitor. 19 hours ago, RainGamma said: Btw I won't play many games that require a 1080 or something. I might just play Gmod and scp secret lab for the moment Okay, i didn't know that. 19 hours ago, RainGamma said: https://pcpartpicker.com/list/gTTCzY okay what about this? Better. Share this post Link to post Share on other sites More sharing options...
Guest Report Post Posted April 25, 2018 2 hours ago, Bara said: Okay, i didn't know that. Better. https://pcpartpicker.com/list/PyYNP3. I changed a little. Btw how much intakes and exhaust should I have? Share this post Link to post Share on other sites More sharing options...
Bara 38 / 2,029 Report Post Posted April 27, 2018 Edited April 27, 2018 by Bara If you want to replace the fans of the enermax water cooler, you should keep the ML-fans for the rad. Should be colder (a bit). Edited April 27, 2018 by Bara Share this post Link to post Share on other sites More sharing options...
John Jeez Man 556 / 12,201 Report Post Posted June 17, 2018 Edited June 17, 2018 by John Jeez Man https://ironsidecomputers.com/ this is a good website for a computer as well. You can pick your parts and they will put it together and ship it to you. Or you can get this https://ironsidecomputers.com/series/conqueror/ if you don't feel like building it. Edited June 17, 2018 by John Jeez Man Server Manager of Squad. Share this post Link to post Share on other sites More sharing options...
Guest Report Post Posted June 18, 2018 Edited June 18, 2018 by RainGamma I already got a build I'm getting this week. Could someone lock this? Edited June 18, 2018 by RainGamma Share this post Link to post Share on other sites More sharing options...
John Jeez Man 556 / 12,201 Report Post Posted June 18, 2018 1 minute ago, RainGamma said: I already got a build I'm getting this week. Could someone lock this? Yeah, would have helped if I just looked at the date. Lawl. Server Manager of Squad. Share this post Link to post Share on other sites More sharing options...
Guest Report Post Posted June 18, 2018 Edited June 18, 2018 by RainGamma 2 minutes ago, John Jeez Man said: Yeah, would have helped if I just looked at the date. Lawl. Well, it's fine thanks for trying to help me! Edited June 18, 2018 by RainGamma Share this post Link to post Share on other sites More sharing options...